Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment · 2010 · 76 citations · 21 references
EngineeringMarine EngineeringOcean EngineeringAutonomous VehiclesComputational Fluid DynamicsFluid DynamicsAutonomous Underwater VehiclesManeuvering HydrodynamicsMarine HydrodynamicsPropulsion SystemsShip HydrodynamicsUnderwater Vehicle DesignAutonomous Underwater Vehicle DesignComputational Fluid Dynamics ValidationHydrodynamic AnalysisHydrodynamic DesignHydrodynamic Force ModelingHydrodynamic ModelingManoeuvring HydrodynamicsValidation Studies
Autonomous underwater vehicle missions are increasingly complex and challenging. The next generation of AUVs must be faster, longer‑lasting, and more manoeuvrable, requiring accurate early‑stage prediction of hydrodynamic forces and moments. A steady‑state CFD analysis on a standard workstation with commercial software is proposed to predict these forces and moments. Simulations can be completed in under a month at a fraction of the cost of physical testing, achieving force predictions within 10 % and moment predictions within 20 % of in‑service performance on a 2 million‑element mesh.
The missions being proposed for autonomous underwater vehicles (AUVs), by both marine scientists and industry, are becoming increasingly complex and challenging. In order to meet these demands the next generation of AUVs will need to be faster, to operate for longer durations, and to be more manoeuvrable than existing vehicles. It is therefore vital that the hydrodynamic forces and moments acting on a self-propelled manoeuvring AUV can be predicted accurately at the initial design stage. In order to achieve this, the use of a computational-fluid-dynamics-based analysis is suggested. The approaches developed are predominantly steady state and suitable for running on a workstation personal computer using a commercial software licence. It is estimated that the proposed simulations would take a competent user less than 1 month for a new concept design. The total cost of these simulations is significantly lower than the cost of building a model and having it commercially tested to capture the same level of detail for the resistance, propulsion, and manoeuvring performance. Based on the validation studies presented, it is estimated that on a 2×10 6 element structured mesh a competent user should be able to predict hydrodynamic forces to within at least 10 per cent and moments to within 20 per cent of in-service performance.
21
Roy Burcher, Louis J. Rydill, C. W. Bert · Journal of Applied Mechanics · 1995 · 137 citations · Full text