EngineeringCivil EngineeringOcean EngineeringCoastal EngineeringOcean WavesOffshore StructuresBreakwater DesignCoastal ErosionCoastal HazardsCoastal StructuresNearshore HydrodynamicsShoreline ManagementBreakwater EffectsBreakwatersCoastal Protection WorksLongshore CurrentsLongshore Sediment TransportOffshore BreakwatersReef-based Coastal ProtectionSubmerged Breakwaters
Often coastal protection works are carried out to mitigate the effects of erosion, but do not attempt to address the cause. For example, rock/concrete walls, breakwaters or groynes along the beach act to mitigate the effects or to realign the beach. However, end effects on the shoreline downstream and the environmental imperatives to retain natural character often preclude hard structures. Also, coastal re-alignment may not be possible in built-up areas where natural alignments would sweep though modern shoreline developments. Wave rotation is a method of coastal protection that targets the cause of the erosion (i.e. longshore wavedriven currents). Offshore, submerged structures are oriented to rotate waves so that the alongshore current (and thus sediment transport) is reduced inshore. The realigned wave angle at the breakpoint (in harmony with the alignment of the beach) results in reduced longshore flows and sediment accretion in the lee of the rotating reef. This paper considers two types of offshore reef that we describe as 'dissipators' and 'rotators'. The former acts to break the waves and protect the coast by reducing wave energy in the lee of the reef. The latter relies on wave rotation to create the chosen wave alignment. The rotator is particularly beneficial in areas of low wave climate or large tidal range when wave breaking is difficult to achieve on a submerged structure, particularly around high tide. Numerical modelling is used to demonstrate the effectiveness of wave rotation to mitigate erosion.
5