52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference · 2011 · 21 citations · 14 references
EngineeringAerospace EngineeringMechanical EngineeringActuatorsAircraft DesignAircraft StructuresActuator DesignAerodynamic DesignComposite Aircraft StructuresWing DesignWing StructuresWing TheoryElectro-mechanical CouplingLightweight Structure DesignMechanical ActuationMonocoque ConstructionMonocoque DesignMorphing Wing DesignMorphing Wing StructuresPinion Actuators
This paper describes the development and ground validation of a variable-span morphing wing intended be fitted to a small UAV prototype. The vehicle flies in the speed range 11m/s to 40m/s. The wing model is designed with the help of graphical CAD/CAM tools and then a full scale prototype is built for preliminary bench testing the wing/actuator system. The wing is built in composite materials and is made of two parts. The inboard part is fixed to the fuselage and uses a monocoque skin construction. The outboard part slides inside the inboard part to change the span of the wing and uses a typical structure made of spar, ribs and thin skin. An electro-mechanical actuation mechanism is developed using an aluminum rack and pinion system driven by two servomotors placed at center of the wings. Bench tests, performed to evaluate wing under load, showed that the system is capable of performing the required extension/retraction cycles and is suitable to be installed on a small UAV prototype.
14
Development and Flight Testing of a Morphing Aircraft, the NextGen MFX-1
John S. Flanagan, Rolf Strutzenberg, Robert B. Myers et al. · 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference · 2007 · 134 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17