Nanocomposite coatings via simultaneous organic–inorganic photo‐induced polymerization: synthesis, structural investigation and mechanical characterization

Abstract

Abstract Hybrid sol–gel films were prepared via a simultaneous organic‐inorganic UV‐curing process using a diaryliodonium salt as a superacid photogenerator. In this single‐step procedure, an epoxy functionalized reactive resin mixed with a variable amount of either of two epoxy trialkoxysilane precursors was UV‐irradiated, causing both the initiation of epoxy ring‐opening copolymerization and the catalysis of trialkoxysilyl sol–gel reactions. The concomitant photo‐induced sol–gel process was found to have a significant effect on the two related propagation mechanisms in competition for the oxirane ring‐opening—the active chain‐end and the activated monomer mechanisms—as proved by a systematic examination of the hybrid material microstructure through 29 Si and 13 C solid‐state NMR spectroscopy. The effect of the oxo‐silica network generation on the epoxy reaction kinetics was also evaluated using real‐time Fourier transform infrared spectroscopy upon varying the epoxysilane structure and its concentration. Thermal and dynamic mechanical analyses were systematically performed on these hybrids, by studying thoroughly their structure–property interdependence. Other mechanical characterizations through tribological and scratch tests suggested that the present photopolymer–silica hybrid material provides a powerful tool to tailor mechanical property profiles. Copyright © 2010 Society of Chemical Industry