Journal of Polymer Science · 1960 · 20 citations · 10 references
Natural SciencesChemical EngineeringChemistryCatalysisPolymer ChemistryPolymer MaterialsPolymer StructurePolymer SynthesisPolymerization ChemistryPolymerization ProcessesCatalyst MechanismsEthylene PolymerizationPolyether SynthesisPolyethylene OxidePolymer End-group AnalysisPolymerization CatalystsPropylene Polymerization
Abstract High concentrations (10% or greater)of zinc chloride or mixtures of aluminum isopropoxide–zinc chloride catalyzed the polymerization of ethylene oxide to low molecular weight polymer. Endgroup analysis of the polymer gave a 1:1 ratio of hydroxyl to chloride when zinc chloride was the catalyst. Using the aluminum–zinc system as the catalyst, the polymer had a 2:1 ratio of hydroxyl to chloride endgroups in addition to isopropoxyl endgroups. These polymer structures are in accord with the coordinate propagation mechanism proposed earlier, followed by termination by hydrolysis of the catalyst–polymer linkage. Zinc chloride reacted at room temperature with both ethylene oxide and propylene oxide to form insoluble “complexes.” The complexes could be recovered and were found to be catalysts for the polymerization of ethylene oxide. However, they were not as active as zinc chloride itself, and they were poor catalysts for the polymerization of propylene oxide. Analysis of the complexes indicated they were mixtures containing a large percentage of zinc hydroxide. Zinc hydroxide, but not zinc oxide, was found to be an effective catalyst for the polymerization of ethylene oxide.
10
Quantitative organic analysis via functional groups
K. G. Stone · Journal of Chemical Education · 1954 · 345 citations
Experiments in organic chemistry
William B. Cook · Journal of Chemical Education · 1955 · 215 citations