IEEE Antennas and Wireless Propagation Letters · 2012 · 274 citations · 13 references
EngineeringElectrical EngineeringMaterials ScienceAntennasMicrowave EngineeringThin FilmsMicrowave AntennasMicrowave MaterialsRadar AntennasRadar AttenuationRadar SystemsShielding MaterialsAbsorber MaterialsBandwidthEquivalent Circuit AnalysisEquivalent Circuit ModelingFrequency-selective SurfacesMicrowave Absorbing MaterialsRadar Cross-sectionUltra-wideband Radar
The paper investigates an ultrathin, broadband radar absorber based on a single‑layer resistive frequency selective surface. The absorber employs a treble‑square resistive FSS backed by grounded foam, with its operation explained by an equivalent circuit model. Simulations show a 10‑dB radar‑cross‑section reduction over 10.7–29 GHz (92.2 % bandwidth) with a 2‑mm thickness (0.071–0.193 λ).
An ultrathin and broadband radar absorber comprising single-layer resistive frequency selective surface (FSS) is investigated in this letter. The resistive FSS layer constructed from resistive/low-conductivity treble-square loops is backed by a grounded foam material. Numerical results show that the proposed absorber can provide a 10-dB radar cross section (RCS) reduction for the conducting plate over the frequency range of 10.7-29 GHz, which is equivalent to a relative bandwidth of 92.2%. Moreover, the structure has the thickness of 2 mm (only 0.071 to 0.193 at lowest and highest frequencies, respectively). The equivalent circuit model is then used to introduce the working principles of the proposed absorber.
13
Filippo Costa, Agostino Monorchio, Giuliano Manara · IEEE Transactions on Antennas and Propagation · 2010 · 837 citations · Full text
Equivalent circuit model for arrays of square loops
R.J. Langley, E.A. Parker · Electronics Letters · 1982 · 466 citations
The design of Jauman absorbers
L.J. du Toit · IEEE Antennas and Propagation Magazine · 1994 · 318 citations