Effect of annealing for CuInS<sub>2</sub> thin films prepared from Cu‐rich ternary compound

Yoji Akaki, Shigeuki Nakamura, Keita Nomoto, Tsuyoshi Yoshitake, Kenji Yoshino

Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics · 2009 · 15 citations · 0 references

Concepts

Abstract

Abstract Evaporated CuInS 2 films using a single‐source were annealed in H 2 S atmosphere from 250 to 500 °C for 60 min. after the evaporation. Polycrystalline CuInS 2 powder grown by a hot‐press method was employed as a source material. Cu/In ratios of the source were 1.0, 1.2 and 1.5. All the films annealed above 350 °C were of CuInS 2 single phase regardless of the Cu/In ratio of the source material. The films prepared from the source material of the Cu/In ratio of 1.5 became Cu‐rich films, which had the Cu/In ratio of 1.37. Carrier concentrations, resistivities and mobilities of the films annealed above 350 °C prepared from the source material of the Cu/In ratio of 1.5 were approximately 1×10 21 cm –3 , 0.1 Ωcm and 0.1 cm 2 /Vs, respectively, at room temperature. The activation energy of the film annealed at 400 °C was evaluated to be 6.5 meV. (© 2009 WILEY‐VCH Verlag GmbH &amp; Co. KGaA, Weinheim)