IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2008 · 44 citations · 10 references
EngineeringMaterials ScienceMechanical EngineeringActuatorsEnergy MaterialsMicroelectromechanical SystemsElectromechanical Energy ConversionLaser CuttingLaser Material ProcessingMechanical HarvestingPiezoelectric ActuationPiezoelectric MaterialsCantilever Energy HarvestersElectrical PropertiesEnergy HarvestingLaser Beam MachiningMachining ProcessesPiezoelectric Energy HarvestingPower DensityVibration Energy Harvesting
In this study, we report results on a piezoelectric- material-based mechanical energy-harvesting device that was fabricated by combining laser machining with microelectronics packaging technology. It was found that the laser-machining process did not have significant effect on the electrical properties of piezoelectric material. The fabricated device was tested in the low-frequency regime of 50 to 1000 Hz at constant force of 8 g (where g = 9.8 m/s(2)). The device was found to generate continuous power of 1.13 microW at 870 Hz across a 288.5 kOmega load with a power density of 301.3 microW/cm(3).
10
MEMS power generator with transverse mode thin film PZT
Young-Jun Jeon, R. Sood, Jaehwa Jeong et al. · Sensors and Actuators A Physical · 2005 · 793 citations
Engineering, Mechanical Engineering, Mechatronics Engineering +14
Consideration of Impedance Matching Techniques for Efficient Piezoelectric Energy Harvesting
Hyeoungwoo Kim, Shashank Priya, H.E. Stephanou et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2007 · 181 citations
Natural Sciences, Electrical Engineering, Materials Science +17