RSC Advances · 2014 · 96 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceBuilding MaterialsEnergy MaterialsHeat TransferBuilding Thermal PerformanceCarbon-based Energy MaterialsEnergy ConversionRenewable EnergySolar Energy SystemsThermoelectric MaterialsCarbon Fiber ReinforcementEnergy HarvestingEnergy Harvesting MaterialsFiber-reinforced Cement CompositesSurface TemperatureThermoelectric Energy ConversionThermoelectric Energy HarvestingThermoelectric Figure Of Merit
In big cities, intensive solar radiation in summers increases the surface temperature of pavements and building roofs to around 60 °C and results in a significant increase in the ambient temperature. It is desirable to capture outdoor thermal energy and convert it into electrical energy. Energy harvesting experiments based on the thermoelectric behavior of carbon fiber reinforced cement composites (CFRC) have been performed for the first time under simulated solar irradiation. The thermoelectric figure of merit (1.334 × 10−7) was determined at room temperature for CFRC with a carbon fiber content of 1.0 weight percent. A slab sample was used to estimate the energy harvesting quality of CFRC at a temperature difference of about 60 °C. 4–5 μw of power was obtained from a one square meter CFRC slab with a thickness of 20 mm. The harvested energy of this one square meter CFRC slab reached a maximum of 8.4 × 10−6 J over 420 minutes of irradiation, while its surface temperature increased quickly.
30
New Directions for Low‐Dimensional Thermoelectric Materials
M. S. Dresselhaus, Gang Chen, Ming Tang et al. · Advanced Materials · 2007 · 4K citations
Energy harvesting: State-of-the-art
Adnan Harb · Renewable Energy · 2010 · 685 citations