Journal of Biomechanical Engineering · 2012 · 31 citations · 30 references
MedicineBiomedical EngineeringSurgeryCardiothoracic SurgeryComputational Fluid DynamicsVascular SurgeryAneurysm RepairAortic Aneurysm RepairAortic SurgeryEndovascular SurgeryHemodynamicsComputational Fluid Dynamics ValidationEndovascular Aortic Aneurysm RepairEndovascular Vascular RepairPulsatile FlowStent-assisted Aneurysm TreatmentWall Shear Stress
The technique of crossing the limbs of bifurcated modular stent grafts for endovascular aneurysm repair (EVAR) is often employed in the face of splayed aortic bifurcations to facilitate cannulation and prevent device kinking. However, little has been reported about the implications of cross-limb EVAR, especially in comparison to conventional EVAR. Previous computational fluid dynamics studies of conventional EVAR grafts have mostly utilized simplified planar stent graft geometries. We herein examined the differences between conventional and cross-limb EVAR by comparing their hemodynamic flow fields (i.e., in the "direct" and "cross" configurations, respectively). We also added a "planar" configuration, which is commonly found in the literature, to identify how well this configuration compares to out-of-plane stent graft configurations from a hemodynamic perspective. A representative patient's cross-limb stent graft geometry was segmented using computed tomography imaging in Mimics software. The cross-limb graft geometry was used to build its direct and planar counterparts in SolidWorks. Physiologic velocity and mass flow boundary conditions and blood properties were implemented for steady-state and pulsatile transient simulations in ANSYS CFX. Displacement forces, wall shear stress (WSS), and oscillatory shear index (OSI) were all comparable between the direct and cross configurations, whereas the planar geometry yielded very different predictions of hemodynamics compared to the out-of-plane stent graft configurations, particularly for displacement forces. This single-patient study suggests that the short-term hemodynamics involved in crossing the limbs is as safe as conventional EVAR. Higher helicity and improved WSS distribution of the cross-limb configuration suggest improved flow-related thrombosis resistance in the short term. However, there may be long-term fatigue implications to stent graft use in the cross configuration when compared to the direct configuration.
30
David N. Ku, Don P. Giddens, Christopher K. Zarins et al. · Arteriosclerosis An Official Journal of the American Heart Association Inc · 1985 · 2.7K citations · Full text
Irène Vignon-Clémentel, C. Alberto Figueroa, Kenneth E. Jansen et al. · Computer Methods in Applied Mechanics and Engineering · 2005 · 637 citations
Engineering, Biomedical Engineering, Computational Engineering +16
Factors Influencing Blood Flow Patterns in the Human Right Coronary Artery
Jerry G. Myers, J. A. Moore, M. Ojha et al. · Annals of Biomedical Engineering · 2001 · 240 citations