High-Temperature Oxidation of Ni–20Cr Alloys with Dispersion of Various Reactive Metal Oxides

Hiroshi Nagai, Makoto Okabayashi

Transactions of the Japan Institute of Metals · 1981 · 27 citations · 23 references

DOIFull text

Open access

Concepts

Abstract

The isothermal oxidation behavior of Ni–20Cr alloys with 0.7 mass% dispersion of various oxides, Y2O3, La2O3, Al2O3, TiO2, SiO2 and Cr2O3 was studied in air at 1373 and 1473 K.The dispersion of La2O3 and Y2O3, especially La2O3, excellently reduced the oxidation rate, whereas the effect of Al2O3 and TiO2 dispersion on the reduction in the oxidation rate was slight. In contrast, the dispersion of SiO2 and Cr2O3 significantly increased the oxidation rate of the Ni–20Cr alloy. There was a tendency that the oxidation of the alloys with various dispersed oxides except La2O3 decreased with increasing negative value of standard free energy formation of the dispersed oxides. The spallation of the scale was also remarkably depending on the type of the dispersoids. The dispersion of La2O3 excellently suppressed the spallation of the scale, whereas the dispersion of SiO2 enhanced the spallation of the scale. Comparison of the ratio given by Rsp=mass of the spalled scale/mass gain for the alloys with various dispersoids suggested that the spalling behavior would be very complex. The incorporation of Ni and the dispersed elements throughout the entire thickness of the Cr2O3 scale was detected by IMA . There was a general tendency that the alloys, whose scale formed during the early stage of oxidation had lower Ni content, showed the lower oxidation rate for the following oxidation process. The accumulation of dispersoids at the scale-alloy interface was observed not in the alloys with La2O3 and Y2O3 which excellently reduced the oxidation rate, but in the alloy with SiO2 which increased the oxidation rate and the spallation of the scale.

References

23