Publication | Closed Access
High-gain, low-noise monolithic HEMT distributed amplifiers up to 60 GHz
21
Citations
2
References
2002
Year
Unknown Venue
Electrical EngineeringChip SizeCutoff FrequenciesEngineeringCircuit DesignHigh-frequency DeviceRf SemiconductorElectronic EngineeringMixed-signal Integrated CircuitApplied PhysicsMillimeter Wave TechnologyLow-noise Monolithic HemtMicroelectronicsMicrowave EngineeringRf Subsystem
Ultrabroad-bandwidth distributed amplifiers with cutoff frequencies of 45 to 60 GHz were developed using 0.25- mu m high-electron-mobility transistors (HEMTs) with a mushroom gate profile. Both single and cascode HEMTs were used as the active devices in the amplifiers. A measured gain as high as 10+or-1 dB from 5 to 50 GHz and a gain of 8+or-1 dB from 5 to 60 GHz, respectively, were achieved from amplifiers using cascode HEMTs. The measured noise figure for these amplifiers is approximately 3-4 dB in the Ka-band. The chip size is 2.3*0.9 mm. Device considerations, circuit design, monolithic IC fabrication, and the measured performance of the amplifiers are outlined.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
| Year | Citations | |
|---|---|---|
Page 1
Page 1