Comparison of Pulse Velocity and Impact-Echo Findings to Properties of Thin Disks from a Fire Damaged Slab

Abstract

The engineering assessment of fire damage to a concrete slab provided the opportunity to compare the results of in situ, nondestructive evaluation (NDE) techniques and laboratory testing of specimens taken from cores extracted from the fire damaged slab. This paper discusses and compares results of in situ pulse velocity and impact-echo testing with dynamic elastic modulus and air permeability index test results of 25mm (1in.) thick disks sawed from concrete cores removed from selected areas of the damaged slab. Both the NDE techniques and the laboratory testing of thin disks identified the presence of damage as a result of the fire. Analysis of the relatively thin concrete specimens permitted assessment of the presence and degree of damage in thin layers, and provided important and useful data on concrete properties for engineering assessment which was not available from NDE alone. Compressive strength results were consistent with the results of other tests but largely inconclusive by themselves. Impact-echo testing was able to identify the presence of a severely deteriorated concrete layer but could not identify the extent or depth of damage or clearly identify less damaged areas. A distressed layer of concrete was found by subsequent laboratory testing to be limited to a near-surface zone in some areas as suggested by the pulse velocity evaluation, but pulse velocity based analysis resulted in an overestimate of the depth of the damage. The findings highlighted a shortcoming of using conventional strength testing alone on investigations involving relatively thin layers of damage and pointed out several key limitations in the use and interpretation of nondestructive evaluation and associated analysis in a field assessment project.