The Influence of Macrodiol Type on the Mechanical Properties of Polyurethane Materials

Antonín Kuta, Zdeněk Hrdlička, Adam Strachota, Milena Špı́rková

Materials and Manufacturing Processes · 2009 · 18 citations · 6 references

Concepts

Abstract

Abstract A one-step bulk polymerization procedure was used to prepare polyurethane (PUR) materials based on hexamethylene diisocyanate, 1,4-butanediol, and a macrodiol. Polycarbonate diol, polyoxypropylene diol, and polybutadiene diol were used as the macrodiols (MW ca 2000), with dibutyltin dilaurate as the catalyst. To evaluate the mechanical properties of the PUR materials, a common tensile test was performed at room temperature and dynamic mechanical analysis (DMA) in the temperature range of −100°C to +150°C. The effect of macrodiol type on mechanical behavior is discussed, together with the influence of the shape of the prepared materials (bulk, film) on the tested properties. Keywords: Mechanical propertiesPolybutadiene diolPolycarbonate diolPolypropyleneglycolPolyurethane ACKNOWLEDGMENTS The authors wish to thank the Ministry of Industry and Trade of the Czech Republic (grant FT-TA3/034), the Ministry of Education, Youth and Sports of the Czech Republic (grant MSM 6046137302), and the Grant Agency of the Academy of Sciences of the Czech Republic (grant IAA400500505) for their financial support of this work. The polycarbonate diols were kindly provided by Asahi Kasei Chemical Corporation, and the polybutadiene diols by Sartomer Company.

References

6