Journal of Engineering for Gas Turbines and Power · 2008 · 86 citations · 15 references
EngineeringMaterials EngineeringMechanical EngineeringHeat TransferMetallurgyThermal AnalysisCoatingsHigh-temperature MaterialsParticle SizeCoolantCooling Rate EffectsDeposition RateParticle DepositionTemperature Effects On DepositionTemperature Effects On Size ReductionThermal Barrier BehaviorThermal Barrier Coatings
Four series of tests were performed in an accelerated deposition test facility to study the independent effects of particle size, gas temperature, and metal temperature on ash deposits from two candidate power turbine synfuels (coal and petcoke). The facility matches the gas temperature and velocity of modern first stage high pressure turbine vanes while accelerating the deposition process. Particle size was found to have a significant effect on capture efficiency with larger particles causing significant thermal barrier coating (TBC) spallation during a 4 h accelerated test. In the second series of tests, particle deposition rate was found to decrease with decreasing gas temperature. The threshold gas temperature for deposition was approximately 960°C. In the third and fourth test series, impingement cooling was applied to the back side of the target coupon to simulate internal vane cooling. Capture efficiency was reduced with increasing mass flow of coolant air; however, at low levels of cooling, the deposits attached more tenaciously to the TBC layer. Postexposure analyses of the third test series (scanning electron microscopy and X-ray spectroscopy) show decreasing TBC damage with increased cooling levels.
15
The Many Faces of Turbine Surface Roughness
Jeffrey P. Bons, Robert P. Taylor, Stephen T. McClain et al. · Journal of Turbomachinery · 2001 · 255 citations
Natural Sciences, Materials Engineering, Materials Science +17
Turbine Blade Surface Deterioration by Erosion
Awatef Hamed, W. Tabakoff, Richard B. Rivir et al. · Journal of Turbomachinery · 2004 · 167 citations
Engineering, Aerospace Engineering, Materials Engineering +17