53rd AIAA Aerospace Sciences Meeting · 2015 · 25 citations · 13 references
EngineeringMarine EngineeringMechanical EngineeringAerodynamicsNaval ArchitectureShip DesignAerodynamic TestingExperimental AerodynamicsShip Model TestingWake Field AnalysisWind LoadingWind-tunnel TestingBlockageExperimental Transonic Wind TunnelsReynolds Number EffectsReynolds Number ScalingWall EffectsWind Load TestingWind LoadsWind Tunnel Modeling
The aerodynamic flow field around a ship’s topside is important to assess ship performance and survivability, evaluate the ship operating envelope, and for launch and recovery of manned and unmanned vehicles. Scaled aerodynamic models of ships are often tested in wind tunnels to measure the topside flow field characteristics. In this study experiments are performed to investigate wind tunnel test practices for modeling ship topside aerodynamics in a general-purpose wind tunnel. Three models of the generic Simple Frigate Shape 2 topside geometry, 4.6, 6.7, and 9.1 feet in length, are used to investigate impacts of Reynolds number, blockage, and wall effects on wind loads and air wake in an 8-by-10-foot wind tunnel. Data collected indicate that blockage effects for the largest model may increase apparent wind loads as much as 20% or more. However, analysis shows that blockage effects can be accounted for using Maskell’s correction for a non-lifting plate. Wall effects also are found to impact wind load and air wake data for large models, specifically models spanning more than two-thirds of the tunnel width in beam-wind conditions. An Atmospheric Boundary Layer (ABL) is simulated by use of an inlet grid system. Wind loads coefficients collected at non-headwind conditions are found to be sensitive to ABL profile, suggesting that physical simulation of ABL is necessary for accurate load measurements.
13
Wind stress on a water surface
H. Charnock · Quarterly Journal of the Royal Meteorological Society · 1955 · 1.9K citations
M.T. Boyle · 1988 · 1.4K citations