Quantitative estimation of compaction and velocity changes using 4D impedance and traveltime changes

Abstract

Abstract In some hydrocarbon reservoirs, severe compaction of the reservoir rocks is observed. This compaction is caused by production, and it is often associated with changes in the overburden. Time-lapse (or 4D) seismic data are used to monitor this compaction process. Since the compaction causes changes in both layer thickness and seismic velocities, it is crucial to distinguish between the two effects. Two new seismic methods for monitoring compacting reservoirs are introduced, one based on measured seismic prestack traveltime changes, and the other based on poststack traveltime and amplitude changes. In contrast to earlier methods, these methods do not require additional empirical relationships, such as, for instance, a velocity-porosity relationship. The uncertainties in estimates for compaction and velocity change are expressed in terms of errors in the traveltime and amplitude measurements. These errors are directly related to the quality and repeatability of time-lapse seismic data. For a reservoir at 3000-m depth with 9 m of compaction, and assuming a 4D timeshift error of 0.5 ms at near offset and 2 ms at far offset, we find relative uncertainty in the compaction estimate of approximately 50–60% using traveltime information only.