BioMedical Engineering OnLine · 2011 · 58 citations · 40 references
DentistryEndodonticsRestorative DentistryFinite Element AnalysisMechanical Behavior Of MaterialsMechanical Properties Of Dental MaterialsDuctilityEndodontic MaterialsMechanical Property SimulationStrength Of MaterialsStrength PropertiesTensile PropertiesBrittle FailureBrittle Failure CriteriaDiametral Tensile StrengthDuctile Failure CriterionEndodontic RestorationsFlexural StrengthModified Mohr TheoryTensile Strength
BACKGROUND: Finite element simulation has been used in last years for analysing the biomechanical performance of post-core restorations in endodontics, but results of these simulations have been interpreted in most of the works using von Mises stress criterion. However, the validity of this failure criterion for brittle materials, which are present in these restorations, is questionable. The objective of the paper is to analyse how finite element results for brittle materials of endodontic restorations should be interpreted to obtain correct conclusions about the possible failure in the restoration. METHODS: Different failure criteria (Von Mises, Rankine, Coulomb-Mohr, Modified Mohr and Christensen) and material strength data (diametral tensile strength and flexural strength) were considered in the study. Three finite element models (FEM) were developed to simulate an endodontic restoration and two typical material tests: diametral tensile test and flexural test. RESULTS: Results showed that the Christensen criterion predicts similar results as the Von Mises criterion for ductile components, while it predicts similar results to all other criteria for brittle components. The different criteria predict different failure points for the diametral tensile test, all of them under multi-axial stress states. All criteria except Von Mises predict failure for flexural test at the same point of the specimen, with this point under uniaxial tensile stress. CONCLUSIONS: From the results it is concluded that the Christensen criterion is recommended for FEM result interpretation in endodontic restorations and that the flexural test is recommended to estimate tensile strength instead of the diametral tensile test.
40
American Journal of Orthodontics · 1961 · 1.8K citations
J.A. Salzmann · American Journal of Orthodontics · 1977 · 614 citations
Mechanical properties and microstructures of glass-ionomer cements
Dong Xie, William A. Brantley, B. M. Culbertson et al. · Dental Materials · 2000 · 519 citations
Finite element analysis of a glass fibre reinforced composite endodontic post
Alessandro Pegoretti, Luca Fambri, Gianluca Zappini et al. · Biomaterials · 2002 · 432 citations