IEEE Sensors Journal · 2005 · 28 citations · 8 references
Natural SciencesElectrical EngineeringPhysicsElectromagnetismInstrumentationMagnetic MaterialsMagnetic CharacterizationMagnetic Circuit AnalysisBandwidthBandwidth AnalysisHigh-sensitivity MagnetometersLow-frequency Noise ReductionMagnetic Noise ReductionMagnetometersSlew RateWhite Noise
The Giant Magneto-Inductive (GMI) effect in amorphous magnetic and conducting wires is analyzed using the concepts and words of electronics engineering to show the way high-sensitivity GMI magnetometers may be designed. Starting from a simple modeling of the magneto-impedance, direct and field-locked loop magnetometers are discussed, together with the implementation of a low-frequency noise-reduction technique that makes good use of a basic modulating method. It allows the removal of a part of the 1/f noise in the magnetometer. The unmodulated magnetometer characteristics are the following: bandwidth higher than 100 kHz and white noise level lower than 7 pT//spl radic/Hz above 40 KHz. Similarly, the main auxiliary modulated magnetometer characteristics are as follows: bandwidth of 4.8 kHz and white noise level lower than 60 pT//spl radic/Hz above 3 Hz. The slew rate in both cases is limited by the electronics to 5 mT/s. The dynamic of these magnetometers is about /spl plusmn/25 /spl mu/T, which corresponds to more than 120 dB in 1 Hz bandwidth above 1 Hz.
8
Magneto-impedance effect in amorphous wires
L.V. Panina, K. Mohri · Applied Physics Letters · 1994 · 1K citations
Magnetic Sensors and Magnetometers
Pavel Ripka · Measurement Science and Technology · 2002 · 663 citations
Analysis of the complex permeability of a ferromagnetic wire
Mohammed Réda Britel, David Ménard, P. Ciureanu et al. · Journal of Applied Physics · 1999 · 17 citations