Near-surface hydrologic response for a steep, unchanneled catchment near Coos Bay, Oregon: 2. Physics-based simulations

Brian A. Ebel, Keith Loague, Joel E. VanderKwaak, W. E. Dietrich, David R. Montgomery, Raymond Torres, Suzanne P. Anderson

American Journal of Science · 2007 · 78 citations · 79 references

DOIFull text

Open access

Concepts

Abstract

The comprehensive physics-based hydrologic-response model *InHM* was used to simulate 3D variably-saturated flow and solute transport for three controlled sprinkling experiments at the Coos Bay 1 (CB1) experimental catchment in the Oregon Coast Range. The *InHM*-simulated hydrologic-response was evaluated against observed discharge, pressure head, total head, soil-water content, and deuterium concentration records. Runoff generation, tensiometric/piezometric response in the soil, pore-water pressure generation, and solute (tracer) transport were all simulated well, based on statistical and graphical model performance evaluation. The *InHM* simulations reported herein indicate that the 3D geometry and hydraulic characteristics of the layered geologic interfaces at CB1 can control the development of saturation and pore-water pressures at the soil-saprolite interface. The weathered bedrock piezometric response and runoff contribution were not simulated well with *InHM* in this study, most likely as a result of the uncertainty in the weathered bedrock layer geometry and fractured-rock hydraulic properties that preclude accurate fracture flow representation. Sensitivity analyses for the CB1 boundary-value problem indicate that: (i) hysteretic unsaturated flow in the CB1 soil is important for accurate hydrologic-response simulation, (ii) using an impermeable boundary condition to represent layered geologic interfaces leads to large errors in simulated magnitudes of runoff generation and pore-water pressure development, and (iii) field-based retention curve measurements can dramatically improve variably-saturated hydrologic-response simulation at sites with steep soil-water retention curves. The near-surface CB1 simulations reported herein demonstrate that physics-based models like *InHM* are useful for characterizing detailed spatio-temporal hydrologic-response, developing process-based concepts, and identifying information shortfalls for the next generation of field experiments. The field-based observations and hydrologic-response simulations from CB1 highlight the challenges in characterizing/simulating fractured bedrock flow at small catchments, which has important consequences for hydrologic response and landslide initiation.

References

79