Early outcomes of sequentially cross-linked thin polyethylene liners with large diameter femoral heads in total hip arthroplasty.

Abstract

The overall survivorship of the study cohort was 100%, compared to a 96% survivorship in the comparison group (two failures due to infection). The mean Harris hip scores in the thin polyethylene cohort improved from 43 points (range, 10 to 67 points) pre-operatively to 91 points (range, 69 to 100 points) postoperatively. Upon radiographic review, no malalignment, radiolucencies, or polyethylene fracture was noted in the study cohort. The mean volumetric wear rate was 0.4122 mm³/year (range, 0.2311 to 0.7310 mm³/year), and the mean linear wear rate was 0.0004 mm/year (range, 0.0002 to 0.0007 mm/year) for the thin polyethylene group. The mean volumetric wear was 0.8839 mm³ (range, 0.4621 to 1.5839 mm³) for this cohort. Excellent clinical and radiographic outcomes were found for patients treated with thin, sequentially cross-linked and annealed polyethylene bearings utilized in total hip arthroplasty, with a nominal thickness of 3.8 millimeters. We have not seen any failures with thin polyethylene liners that have undergone this manufacturing process, which is in contradistinction to results of previously reported thin polyethylene liners. Wear rates were lower than other bearing surfaces at similar periods.