Multichannel adaptive filtering for signal enhancement

E. Ferrara, Bernard Widrow

IEEE Transactions on Acoustics Speech and Signal Processing · 1981 · 69 citations · 4 references

Concepts

TL;DR

The paper proposes an adaptive technique to enhance signals in the presence of additive noise. The method employs multiple input channels with correlated signals and uncorrelated noise, filtering each before summing to produce a least‑squares estimate of the underlying signal. The adaptive enhancer achieves near‑optimal performance, with output noise and distortion minimized and output SNR approximating the sum of input SNRs, especially when many correlated channels are available, thereby generalizing classic beamforming.

Abstract

An adaptive technique for enhancing a signal against additive noise is described. It makes use of two or more input channels containing correlated signal components but uncorrelated noise components. The various input signals need not be of the same waveshape, since the adaptive enhancer filters the inputs before summing them. The output is a best least squares estimate of the underlying signal in a chosen input channel. Adaptivity allows optimal performance even though the signal and noise characteristics differ from channel to channel and are unknown a priori. Formulas for signal distortion and output noise power are developed. The more input channels available containing correlated signal components, the better will be the system performance. Excellent performance is obtained when the sum of the filter input signal-to-noise ratios (SNR's), defined as functions of frequency, is large compared to unity at all frequencies of interest. In this case the output noise is small, the output signal distortion is small, and the output SNR is approximately equal to the sum of the filter input SNR's. As such, the multichannel adaptive signal enhancer is a generalization of the classic time-delay-and-sum beamforming antenna.

References

4