NASA STI Repository (National Aeronautics and Space Administration) · 1975 · 19 citations · 1 references
Open access
EngineeringAerospace EngineeringAircraft DesignMachine DesignPropulsionCompressible FlowEngine DesignEngine Performance CharacteristicsLow-speed AerodynamicsSupersonic AerodynamicsTurbofan EnginesAngle Of AttackDragInlet DesignInlet HydrodynamicsMach NumberMach Number EffectsPressure RecoveryTurbomachinery Internal Flow
A full-scale, mixed-compression inlet was designed for operation with the TF30-P-3 turbofan engine and tested at Mach numbers of 2.5 and 2.0. The two-cone axisymmetric inlet had minimum internal contraction consistent with high total pressure recovery and low cowl drag. At Mach 2.5, inlet recovery was 0.906 with only 0.021 centerbody bleed mass-flow ratio and no cowl bleed. Increased centerbody bleed gave a maximum inlet unstart angle of attack of 6.85 deg. At Mach 2.0, inlet recovery was 0.94 with only 0.014 centerbody bleed mass-flow ratio and no cowl bleed. Inlet performance and angle-of-attack tolerance is presented for operation at Mach numbers of 2.5 and 2.0.
1