IEEE Transactions on Dielectrics and Electrical Insulation · 2012 · 11 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsPolymer ChemistryPolymer MaterialsNanocompositesOrganic Electronic MaterialsPolymer CharacterizationPolymer NanocompositesPolymer Thin FilmsPolymeric NanomaterialsCapacitorsDielectric BreakdownFilm CapacitorsNanocomposite FilmsNanocomposite PolymersNanocomposite SynthesisNanoplateletsOrganic-inorganic Nanocomposites
Organic-inorganic nanoplatelets in the form of nanoscale titanium phenyl phosphonate (nano-Ti(PPA) <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ) were synthesized with dimensions of 100-250 nm by 5-10 nm. Upon incorporation into fluorene polyester (FPE) at low loadings (0.3 to 3 wt%), the resulting polymer nanocomposite film exhibited significant gains in breakdown field over the neat polymer film, with gains of 37% at 20 °C, 39% at 150 °C, and 18% at 275 °C. The increase in breakdown field was much greater than expected based on previous literature reports for incorporation of spherical SiO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> or TiO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> , and it is likely that these benefits arise from the high aspect ratio of the nano-Ti(PPA) <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> and the inherent organic functionalization of the material. Dielectric constant was unchanged within experimental error, and loss tangent decreased slightly at higher temperatures, upon the addition of the filler. Material energy densities of the resulting nanocomposite film were calculated to range from 3.6 J/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> at 150 °C to 1.6 J/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> at 275 °C, which are the highest known values obtained for a polymer-based capacitor material that can operate at these high temperatures.
14
W.J. Sarjeant, J. Zirnheld, F.W. MacDougall · IEEE Transactions on Plasma Science · 1998 · 418 citations