Microstructure and Magnetic Properties of Lead Ferrite

Abstract

Unoriented lead ferrite specimens were prepared by calcining and sintering techniques. Specimens having an initial composition of Pb0.5Fe 2 O 3 had the best permanent magnet properties (for nondoped material). The effects of small amounts of added oxides on the microstructure and magnetic properties were also determined. Silica and boria were most effective in raising the (B a H a ) max to over 1.4 × 10 6 G.Oe as compared to 0.9 to 1.1 × 10 5 G.Oe for commercial un oriented barium ferrite magnets. Optical and electron microscopy revealed that silica and boria form low melting phases as the specimens are sintered, which, acting as fluxes (probably by a solution‐precipitation mechanism), enhance the densification of the magnets, thereby raising the B r , and (B a H a ) max , values. On cooling, these nonmagnetic low‐melting phases are retained at the ferrite grain boundaries where they inhibit domain wall motion which would otherwise lead to a reduction in coercive force. Although these magnets are termed “un oriented” to distinguish them from “oriented” ferrites which are purposely aligned before sintering, a slight orientation is imparted to the polycrystalline compact during the pressing operation before sintering. The silica and boria additions increase the degree of orientation by accelerating the rate of densification. The increase in orientation accounts for part of the increase in B r , and (B a , H a ) max .