The mechanical and tribological properties of nitric acid‐treated carbon fiber‐reinforced polyoxymethylene composites

Abstract

ABSTRACT The carbon fibers have been exposed to nitric acid oxidation treatments and introduced into polyoxymethylene composites (POM/CF). The nitric acid treatment increases the number of the flaws, roughness of the surface, and disorder of carbon atoms on fiber, as well as introduces reactive functional groups, which could lead to a better mechanical bonding between fiber and the matrix. It is shown that the impact strength and fiber‐matrix adhesion in composites (POM/mCF) are superior to those for POM/CF composites. Simultaneously, the addition of mCF improves flexural strength and modulus relative to virgin POM significantly. Average friction coefficient values of POM/CF composites are lower than that of POM/mCF composites. As the percentage of fiber increases, the trend of wear ratio of the composites goes down initially and bumps up afterwards. The results indicate that the proper contents of CF and mCF in composites range from 5 wt % to 20 wt %. Scanning electron microscopy of worn surface morphology has revealed that the main wear mechanism of the composites were adhesive wear and ploughing wear. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41812.