Sodium-carbonate co-substituted hydroxyapatite ceramics

Abstract

Powders of sodium-carbonate co-substituted hydroxyapatite, having sodium content in the range of 0.25-1.5 wt.% with a 0.25 wt.% step, were prepared by a precipitation-solid state reaction route. Compacts of the powders were sintered in a CO2 flow (4 mL/min) at 1100 ?C for 2 h. The sintered ceramics contained sodium and carbonate ions in the ranges of 0-1.5 wt.% and 1.3-6 wt.%, respectively, which are typical impurity concentrations in biological apatite. A relationship between sodium and carbonate contents and the type of carbonate substitution was found. The total carbonate content progressively increased with the sodium content. The obtained ceramics showed an AB-type carbonate substitution. However, the substitution became more B-type as the sodium content increased. As a result, the carbonation was almost B-type (94 %) for the highest sodium content (1.5 wt.%).