Coating of structured catalytic reactors by plasma assisted polymerization of tetramethyldisiloxane

Adil Essakhi, B. Mutel, Philippe Supiot, Axel Löfberg, Sébastien Paul, Véronique Le Courtois, Valérie Meille, Isabelle Pitault, Elisabeth Bordes‐Richard

Polymer Engineering and Science · 2011 · 10 citations · 35 references

DOIFull text

Open access

Concepts

Abstract

Abstract An original process based on cold plasma assisted polymerization of tetramethyldisiloxane (TMDSO) in the presence of O 2 was developed to cover substrates showing various shapes (plate and foam). In the frame of catalytic application, this coating has to act as a bonding layer for the deposition of active phase such as VO x /TiO 2 well‐known for its properties in NO x and volatile organic compounds abatement and in the production of chemical intermediates. Good results were obtained by the deposition of a 5‐μm thick polysiloxane film followed by a thermal treatment under air at 650°C and by a remote nitrogen plasma post treatment. This procedure led to a silica‐like layer allowing its coating in an aqueous suspension of TiO 2 . Such a multilayered material can be obtained homogeneously on the whole surface of a sample showing a 3D open geometry like metallic foam. Characterizations of the different steps of the elaborated multilayer material were performed by Fourier transformed infrared spectroscopy, Raman spectrometry, X‐ray photoelectron spectroscopy, and electron probe micro‐analyzer. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers

References

35