IEEE Transactions on Electromagnetic Compatibility · 2002 · 84 citations · 10 references
EngineeringComputational EngineeringElectrical EngineeringComputational ElectromagneticsElectromagneticsElectromagnetismElectrical System TestingElectrical WiringElectromagnetic CompatibilityElectromagnetic Compatibility ValidationElectromagnetic MethodsTransmission LinesCable CouplingCable Electromagnetic FieldsCable SystemsElectrical Network ModelingMulticonductor Transmission LinesNumerical SimulationTransmission Line AnalysisTransmission Line Modeling
This paper deals with the application of electromagnetic field-to-transmission-line coupling models for large cable systems analysis. It emphasizes the use of Agrawal's (1980) model applied here in a numerical simulation of an electromagnetic susceptibility problem up to 500 MHz. Based on the concepts of EM topology, the proposed methodology consists in calculating the incident fields with a three-dimensional (3-D) computer code and the coupling on cables with a multiconductor transmission-line network computer code. In order to validate the efficiency of this methodology in an industrial context, an experiment has been performed on a prototype wiring installed in a Renault Laguna car, stressed by an EM plane wave. Numerous validation configurations have been carried out. First, the prototype cable network under study has been tested on a ground plane to validate the coupling model but also, to validate the cable-network topology itself. Second, EM fields have been measured onto the structure and inside the structure. Then, they have been compared to 3-D calculations, performed with an FDTD code. Third, comparisons between measurements and calculations of bulk currents and voltages on 50 /spl Omega/ loads on the wiring have been achieved.
10
William A. Radasky, Carl E. Baum, Magnus Wik · IEEE Transactions on Electromagnetic Compatibility · 2004 · 414 citations
Leon W. Zelby · Electric Power Systems Research · 1979 · 321 citations