Depth‐Dependent Indentation Microhardness Studies of Different Polymer Nanocomposites

Netra Lal Bhandari, Ralf Lach, Wolfgang Grellmann, Rameshwar Adhikari

Macromolecular Symposia · 2012 · 16 citations · 21 references

Concepts

Abstract

Abstract Continuous depth sensing indentation microhardness measurements were performed to investigate the effect of filler content and dimensionality on the mechanical behaviour of different polymer nanocomposites. In 1D filler reinforced nanocomposites (such as PP/MWCNT system), both the hardness and the indentation modulus were found to appreciably increase up to a filler weight fraction of 1.6 wt.‐%. Further addition of the filler changed the properties only insignificantly. In the nanocomposites with 2D filler (such as in PA6/LS) both the hardness and the indentation modulus increase notably with the addition of the filler and showed intense plasticity. In the investigated systems and composition range, the 3D filler (such as PP/OS2) showed no reinforcing effect at all. In was concluded that the 1D and 2D nanofillers play much more effective reinforcing role to improve the mechanical properties than the 3D fillers.

References

21