IEEE Transactions on Antennas and Propagation · 2010 · 81 citations · 11 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringWireless CommunicationsAntenna ArraysAntenna BandwidthAntenna DesignMicrostrip AntennasMicrowave AntennasPlanar AntennasBandwidthFront-to-back RatioGain BandwidthMicrostrip Array AntennasMicrostrip Patch AntennasPatch AntennasPrinted AntennasWideband Microstrip Antennas
A combination of slots and series-fed patch antenna array is introduced leading to an array antenna with wide bandwidth, low sidelobe level (SLL), and high front-to-back ratio (F/B). Three structures are analyzed. The first, the reference structure, is the conventional series-fed microstrip antenna array that operates at 16.26 GHz with a bandwidth of 3%, SLL of -24 dB, and F/B of 23 dB. The second is similar to the reference structure, but a large slot that covers the patch array is removed from the ground plane. This results in a wide operating bandwidth of over 72% for , with a 3 dB gain bandwidth of over 15.9%. The SLL of this structure is improved to more than at 16.26 GHz, and stable SLL of over 15.5-16.4 GHz band is also exhibited. This structure has a bi-directional radiation pattern. To make the pattern uni-directional and increase the F/B, a third structure is analyzed. In this structure, rather than one single large slot, an array of slots is used and a reflector is placed above the series-fed patch array. This increases the F/B to 40 dB. The simulated and measured results are presented and discussed.
11
Microstrip antenna aperture-coupled to a microstripline
D.M. Pozar · Electronics Letters · 1985 · 815 citations
Comparison of three series fed microstrip array geometries
D.M. Pozar, D.H. Schaubert · 2002 · 58 citations