Journal of the American Ceramic Society · 1991 · 120 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsNanomaterialsNanotechnologyCreep BehaviorCreep DeformationDeformation MechanismsElastic DeformationNanomechanicsStress-strain BehaviorCreep Deformation KineticsCreep MechanismsCreep Strain RateDeformationGrain Size EffectsNanocrystalline MaterialsStress ExponentTemperature Dependence Of Creep
Nanocrystalline TiO 2 with densities higher than 99% of rutile has been deformed in compression without fracture at temperatures between 600° and 800°C. The total strains exceed 0.6 at strain rates as high as 10 −3 s −1 . The original average grain size of 40 nm increases during the creep deformation to final values in the range of 120 to 1000 nm depending on the temperature and total deformation. The stress exponent of the strain rate, n , is approximately 3 and the grain size dependence is d − q with q in the range of 1 to 1.5. It is concluded that the creep deformation occurs by an interface reaction controlled mechanism.
16
Diffusional Viscosity of a Polycrystalline Solid
Conyers Herring · Journal of Applied Physics · 1950 · 2.5K citations
Diffusion-accommodated flow and superplasticity
Michael F. Ashby, R.A. Verrall · Acta Metallurgica · 1973 · 1.4K citations
E. W. Hart · Acta Metallurgica · 1967 · 1K citations
Natural Sciences, Materials Engineering, Materials Science +12
Nanocrystalline materials an approach to a novel solid structure with gas-like disorder?
R. Birringer, H. Gleiter, H.-P. Klein et al. · Physics Letters A · 1984 · 702 citations