Predictive digital current programmed control

Jingquan Chen, Aleksandar Prodić, Robert W. Erickson, Dragan Maksimović

IEEE Transactions on Power Electronics · 2003 · 586 citations · 20 references

Concepts

TL;DR

The paper proposes predictive digital current programmed control for valley, peak, or average current, applicable to various power converters such as rectifiers with power‑factor correction. Control laws for buck, boost, and buck‑boost converters are derived to implement predictive digital current programmed control. The study shows that suitable PWM methods enable oscillation‑free predictive digital current control for valley, peak, or average current, and experimentally demonstrates very low current distortion meeting strict avionics requirements on a boost PFC.

Abstract

This paper explores predictive digital current programmed control for valley, peak or average current. The control laws are derived for the three basic converters: buck, boost, and buck-boost. It is found that for each variable of interest (valley, peak or average current) there is a choice of the appropriate pulse-width modulation method to achieve predictive digital current control without oscillation problems. The proposed digital control techniques can be used in a range of power conversion applications, including rectifiers with power factor correction (PFC). Very low current distortion meeting strict avionics requirements (400-800 Hz line frequency) is experimentally demonstrated on a digitally controlled boost PFC employing predictive average current programmed control.

References

20