IEEE Transactions on Applied Superconductivity · 2010 · 19 citations · 7 references
Natural SciencesMaterials SciencePhysicsCondensed Matter PhysicsHeat TransferThermodynamicsHigh-temperature MaterialsSuperconducting MaterialsThermal InsulationBushingsCryogenic EngineeringCryogenic InsulationCryogenic SafetyCryogenic SystemsGaseous InsulationHigh-voltage BreakdownInsulation Performance
High voltage cryogenic insulation issues need to be addressed in order to promote the commercialization of high temperature superconducting (HTS) equipment. One of the critical components for superconducting devices is the bushing whose role is to safely supply high current to the device. Due to a steep temperature gradient, commercial bushings which have been insulated with SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> gas could not be directly applied to cryogenic equipment due to liquefaction of SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> in the cryogenic environment; therefore, alternative suitable structure and insulation methods should be developed. As a fundamental step in the development of the optimum bushings for HTS devices, the breakdown characteristics of liquid nitrogen mixed with liquefied insulating gases such as N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> , SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> and CF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> have been investigated. In particular, we noted the insulation characteristics of CF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> gas whose liquefication temperature is much higher than SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> gas. Thus, in order to investigate the possibility of substituting CF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> gas for SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> gas for the bushings of HTS electrical equipment, impulse tests, AC withstanding voltage tests, and partial discharge (PD) tests have been performed. As a result of these tests, it was shown that mixtures of liquefied insulating gases have a much higher breakdown voltage compared to pure liquid nitrogen. Especially in a cryogenic environment, the usage of SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> gas should be evaluated due to freezing effects. On the other hand, CF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> gas has shown excellent insulation properties even in a cryogenic environment and could be utilized as an insulation gas for high voltage bushings of HTS electrical equipment.
7
Debbie A. Haught, Jim Daley, Paul Bakke et al. · International Journal of Applied Ceramic Technology · 2007 · 33 citations · Full text
Natural Sciences, Electrical Engineering, Critical Infrastructure Protection +10