IEEE Transactions on Applied Superconductivity · 2004 · 40 citations · 4 references
Natural SciencesElectrical EngineeringPhysicsCondensed Matter PhysicsMagnetic MaterialsThin FilmsElectrical ConductivityMagnetic ComponentsMagnetic Thin FilmsSuperconducting Magnet SystemsSuperconducting MaterialsSuperconducting Thin FilmsElectrical ResistivityHeatersHigh-temperature Superconducting MagnetsHigh-temperature SuperconductorsPersistent Current ModeSuperconducting Magnet DesignSuperconducting MagnetsSuperconducting Wires
This paper describes design concept, fabrication, and experimental results of a persistent-current switch (PCS) for high temperature superconducting (HTS) magnets. Recently large-size HTS magnets have been fabricated with Ag-sheathed Bi2223 wires. Even in the case of HTS magnets, persistent-current mode has the advantage of maintaining a steady magnetic field for long periods. A PCS for an HTS magnet is a key component to realize persistent-current mode. A PCS for an HTS magnet must work at the same operating temperature as an HTS coil, and electrical resistivity for a PCS conductor should be sufficiently large to reduce the energy dissipation during charge and to shorten the switching time. To satisfy these requirements, a YBCO thin film is adopted for a PCS conductor. The PCS is used in a vacuum and conductively cooled by a cryocooler at around 20 K when the switch is "on". To change the PCS from "on" to "off", the temperature of the PCS is increased to around 100 K by electrical heaters. A new design concept of a PCS for an HTS magnet is introduced. And the test results of rated current operation, switching operation and persistent-current operation are shown.
4
<i>Materials at Low Temperatures</i>
R. P. Reed, A. F. Clark, Lawrence G. Rubin · Physics Today · 1984 · 261 citations
Kenji Tasaki, M. Ono, Takashi Yazawa et al. · IEEE Transactions on Applied Superconductivity · 2001 · 16 citations
Natural Sciences, Electrical Engineering, Materials Science +14