Electroanalysis · 2004 · 37 citations · 66 references
Natural SciencesChemical EngineeringChemistryBiosensorsCatalysisElectrochemistryElectrochemical BiosensorsElectrochemical SensorsElectrode MaterialsRedox CatalysisRedox ChemistryRedox ProcessesAmperometric BiosensorsAmperometric DetectionAmperometric Enzyme BiosensorsAmperometric SensingDisposable ElectrodesGlucose BiosensorsGlucose SensorsPrussian Blue Analogues
Abstract Presented in this work is the first step towards an enzymeless/mediatorless glucose sensor. We first observed remarkable electrocatalytic oxidation of glucose using combinative ruthenium oxide (RuOx)‐Prussian blue (PB) analogues (designated as mv RuOx‐RuCN, mv : mixed valent) at ca. 1.1 V (vs. Ag/AgCl) in acidic media (pH 2 Na 2 SO 4 /H 2 SO 4 ). Individual RuOx and PB analogs failed to give any such catalytic response. A high ruthenium oxidation state (i.e., oxy/hydroxy‐Ru VII , E °≈1.4 V vs. RHE), normally occurring in strong alkaline conditions at RuOx‐based electrodes, was electrogenerated and stabilized (without any conventional disproportionation reaction) in the mv RuOx‐RuCN matrix for glucose catalysis. Detail X‐ray photoelectron spectroscopic studies can fully support the observation. The catalyst was chemically modified onto a disposable screen‐printed carbon electrode and employed for the amperometric detection of glucose via flow injection analysis (FIA). This system has a linear detection range of 0.3–20 mM with a detection limit and sensitivity of 40 μM ( S/N =3) and 6.2 μA/(mM cm 2 ), respectively, for glucose. Further steps towards the elimination of interference and the extendibility to neutral pHs were addressed.
66