IEEE Transactions on Microwave Theory and Techniques · 2003 · 36 citations · 24 references
EngineeringElectrical EngineeringAntennasCircuit TheoryMicrowave EngineeringMicrowave FiltersMicrowave Integrated CircuitsMicrowave Network AnalysisMicrowave Passive ComponentsMicrowave Transmission LinesTransmission LinesAnalytical ModelsBandpass FiltersCoupled Line FiltersInsertion LossInsertion Loss ReductionMicrostrip T-junctionsPlanar Microwave CircuitsTransmission Line Modeling
This paper deals with the design of passive coplanar devices in the W-frequency band. As long as coplanar transmission lines are correctly dimensioned, analytical models based on quasi-TEM approximation can be used. Such models are associated with a correct definition of the reference planes at the junctions and employed for junction discontinuities, T- and cross-junctions. In order to validate these assertions, simulated and experimental data on classical quarter-wavelength shunt-stub filters are first presented. Then the design of traditional coupled-line filters is examined. The problems in terms of insertion loss associated with these kinds of narrow-band applications are discussed here. Minimization of insertion losses requires increasing the width of the strips. Consequently, the design becomes complex and modeling using transmission-line models less accurate. Nevertheless, as an optimization procedure is needed to tune the filter theoretically, such a very fast design method is necessary. Simulated and experimental results in the range 500 MHz to 110 GHz are compared throughout the paper.
24
Dissipation Loss in Multiple-Coupled-Resonator Filters
S.B. Cohn · Proceedings of the IRE · 1959 · 121 citations