EFFECTS OF IRRADIATION ON THERMAL CONDUCTIVITY OF ALLOY 690 AT LOW NEUTRON FLUENCE

Woo Seog Ryu, Dae Gyu Park, UNG SUP SONG, Jin Seok Park, Sang Bok Ahn

Nuclear Engineering and Technology · 2013 · 24 citations · 15 references

DOIFull text

Open access

Concepts

Abstract

Alloy 690 has been selected as a steam generator tubing material for SMART owing to a near immunity to primary water stress corrosion cracking. The steam generators of SMART are faced with a neutron flux due to the integrated arrangement inside a reactor vessel, and thus it is important to know the irradiation effects of the thermal conductivity of Alloy 690. Alloy 690 was irradiated at HANARO to fluences of (0.7−28) × 1019n/cm2 (E>0.1MeV) at 250°C, and its thermal conductivity was measured using the laser-flash equipment in the IMEF. The thermal conductivity of Alloy 690 was dependent on temperature, and it was a good fit to the Smith-Palmer equation, which modified the Wiedemann-Franz law. The irradiation at 250°C did not degrade the thermal conductivity of Alloy 690, and even showed a small increase (1%) at fluences of (0.7∼28) × 1019n/cm2 (E>0.1MeV).

References

15