Physical Chemistry Chemical Physics · 2012 · 20 citations · 25 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesThin FilmsDielectricsOrganic Electronic MaterialsPolymer SurfacesPolymer Thin FilmsThin-film MaterialsThin-film TransistorsDomain GrowthGlass Transition TemperatureHigh-k DielectricsInterface Trap DensityOptimum TemperatureOrganic ElectronicsOrganic Thin FilmsOrganic Thin-film Transistors
We report on the fabrication of N,N'-ditridecyl-perylene-3,4:9,10-tetracarboxylic diimide-C13 (PTCDI-C13), n-channel organic thin-film transistors (OTFTs) with 30 nm Al(2)O(3) whose surface has been un-modified or modified with hexamethyldisilazane (HMDS) and thin hydrophobic CYTOP. Among all the devices, the OTFTs with CYTOP-modified dielectrics exhibit the most superior device performance and stability. The optimum post-annealing temperature for organic n-channels on CYTOP was also found to be as low as 80 °C, although the post-annealing was previously implemented at 120-140 °C for PTCDI domain growth in general. The low temperature of 80 °C hardly damages the CYTOP/n-channel organic interface which is deformed at a temperature higher than the glass transition temperature of CYTOP (∼110 °C). The pentacenequinone passivation layer turned out to be helpful to keep the interfacial trap density minimum, according to the photo-excited charge collection spectroscopy results for our 80 °C-annealed OTFTs with CYTOP-modified dielectrics.
25
A high-mobility electron-transporting polymer for printed transistors
He Yan, Zhihua Chen, Yan Zheng et al. · Nature · 2009 · 3K citations
Natural Sciences, Materials Engineering, Materials Science +14
General observation of n-type field-effect behaviour in organic semiconductors
Lay‐Lay Chua, Jana Zaumseil, Jui-Fen Chang et al. · Nature · 2005 · 2.3K citations