IEEE Transactions on Antennas and Propagation · 2003 · 56 citations · 23 references
EngineeringElectrical EngineeringAntennasPropagationWireless CommunicationsAntenna MeasurementMultipath PropagationPropagation DelayPropagation ModelingReceiver SystemsWireless Channel ModelingBeamwidthDelay SpreadDelay Spread ModelingIndoor Channel ModelingIndoor PropagationMultipathTime Delay Spread
The paper presents spatio-temporal measurements for the peer-to-peer radio channel at a center frequency of 1920 MHz with 140 MHz of radio-frequency bandwidth. The measurements were taken using a spread-spectrum channel sounder and an automated spatial probing system that uses precise computer-controlled positioning and orientation of omnidirectional and directional (30/spl deg/ beamwidth) antennas to measure both the angles-of-arrival and time-delays of multipath components. We use a unitless definition of angular spread which we proposed previously (see Durgin, G.D. and Rappaport, T.S., IEE Electron. Lett., vol.34, no.25, p.2431-2, 1998). Transmitter-receiver configurations include six outdoor-to-outdoor cross-campus locations at Virginia Polytechnic Institute and State University (17-219 ns rms delay spread, 0.36-0.91 angular spread), three outdoor-to-indoor locations (27-34 ns rms delay spread, 0.78-0.98 angular spread), and three indoor-to-indoor locations (29-45 ns rms delay spread, 0.73-0.90 angular spread). The paper also quantitatively describes a trend that shows how angular spread increases with increasing delay spread.
23