Materials science forum · 2006 · 10 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryMetallic MaterialsMetallurgyAlloysMetal MaterialsMetallurgical KineticsMetalsPhysical MetallurgyWork HardeningAge HardeningAgeing BehaviorAlloying ElementsCopper AlloysHardening KineticsHardnessMetal Aging
The interaction between vacancies and Sn and Cu solute atoms in an Al-1.7at.%Cu- 0.01at.%Sn alloy was investigated by exploring the effect of incorporating natural ageing into conventional age hardening treatment. It was found that provided the artificial ageing temperature does not exceed a critical value between 160°C and 200°C, a narrow window of natural ageing (3-100 h) will result in a significant acceleration of the age hardening response and no decrease in peak hardness. Transmission electron microscopy showed that this effect reflects a large and rapid increase in number density of Cu GP(I) zones, and, to a lesser extent, of θ". The distribution and number density of θ' are essentially unaffected. Three-dimensional atom probe provided strong evidence that refinement of GP(I) zone distribution is not due to clustering of Cu atoms onto pre-existing Sn clusters. Instead it appears to be caused by a subtle interaction between vacancies, Sn and Cu atoms.
6
Assisted nucleation of θ′ phase in Al–Cu–Sn: the modified crystallography of tin precipitates
Laure Bourgeois, J.F. Nie, B.C. Muddle · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · 2005 · 56 citations
Natural Sciences, Materials Engineering, Materials Science +17