IEEE Photonics Technology Letters · 1991 · 107 citations · 10 references
Natural SciencesElectrical EngineeringMaterials ScienceOptical MaterialsOpticsPhotonicsFiber OpticsFiber PropertiesOptical AmplifiersOptical FibersOptical Properties Of MaterialsRare-earth-doped MaterialsAmplified Spontaneous EmissionErbium-doped Fiber AmplifiersFiber CharacterizationFibersGainOptical AmplificationOptical Amplifier ModelingSpontaneous Emission
Erbium-doped fibers are characterized using loss and gain coefficients, and one amplifier saturation parameter. With a large-signal amplifier model that resolves the amplified spontaneous emission spectrum, these easily measured parameters allow the fiber performance in 980-nm or 1480-nm pumped optical amplifiers to be assessed rapidly. In tests at 980-nm pump wavelength, good agreement between the theoretical and experimentally measured gains was obtained with amplifiers having either germano-silicate or germano-alumino-silicate core fibers.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
10
Modeling erbium-doped fiber amplifiers
C.R. Giles, E. Desurvire · Journal of Lightwave Technology · 1991 · 1.2K citations
Modeling of gain in erbium-doped fiber amplifiers
A.A.M. Saleh, R.M. Jopson, J. D. Evankow et al. · IEEE Photonics Technology Letters · 1990 · 297 citations
Three-level fiber laser amplifier: a theoretical model
J.R. Armitage · Applied Optics · 1988 · 97 citations