Acta Odontologica Scandinavica · 2011 · 79 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsStructural MaterialsCoatingsFlexural PropertiesGlass Ionomer CementsMaterial PerformanceWear ResistanceWear-resistant MaterialsCement Wear ResistanceFlexural StrengthFlexural Strength TestingGlass Ionomer CompositesNanofilled CompositesNanofilled Glass Ionomer CementsThree-point Bending TestWear
OBJECTIVES: The objective of this study was to investigate the effect of a nanofilled resin coat on the flexural strength (FS) and the early wear (after 50,000 and 200,000 cycles) of the glass-ionomer cements Fuji IX GP Extra (FIXE) and Ketac Molar Aplicap (KM). MATERIALS AND METHODS: Specimens were prepared and half of them were coated with G-Coat plus. The uncoated specimens were used as controls. Flexural strength (n = 10) was evaluated after 24 h using a 3-point bending test on a universal testing machine (ISO 9917-2). Wear (n = 20) was evaluated after 50,000 and 200,000 cycles using the ACTA wear machine. One-way, two-way ANOVA and Tukey post-hoc tests were used to analyze differences in FS and wear. RESULTS: For FIXE the coat significantly increased the FS and the wear along the two time spans. KM did not show a significant difference in FS with the coat. Improvements in wear were observed only after 50,000 cycles. CONCLUSION: Based on these laboratory results, it is concluded that G-coat Plus is indicated in association with GP IX Extra with the aim to improve the mechanical properties of the former. However, this study is limited to a short-term observation.
28
Mechanical properties and microstructures of glass-ionomer cements
Dong Xie, William A. Brantley, B. M. Culbertson et al. · Dental Materials · 2000 · 519 citations