IEEE Journal of Solid-State Circuits · 1990 · 239 citations · 15 references
EngineeringComputer EngineeringComputer ScienceComputer ArchitectureComputer-aided DesignField-programmable Gate ArraysCombinational Logic DescriptionDigital Integrated Circuit DesignDigital Logic DesignField-programmable Gate Array ArchitectureFpga ArchitectureLookup TablesArea EfficiencyArea-efficient Logic Block DesignCombinational Logic DesignDigital Logic CircuitsField-programmable Gate Arrays (Fpgas)Logic Block DesignLogic Block Placement StrategiesTechnology Mapping To Logic Blocks
The relationship between the functionality of a field-programmable gate array (FPGA) logic block and the area required to implement digital circuits using that logic block is examined. The investigation is done experimentally by implementing a set of industrial circuits as FPGAs using CAD (computer-aided design) tools for technology mapping, placement, and routing. A range of programming technologies (the method of FPGA customization) is explored using a simple model of the interconnection and logic block area. The experiments are based on logic blocks that use lookup tables for implementing combinational logic. Results indicate that the best number of inputs to use (a measure of the block's functionality) is between three and four, and that a D flip-flop should be included in the logic block. The results are largely independent of the programming technology. More generally, it was observed that the area efficiency of a logic block depends not only on its functionality but also on the average number of pins connected per logic block.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
15
Dielectric based antifuse for logic and memory ICs
E. Hamdy, John McCollum, S.-O. Chen et al. · 2003 · 87 citations
Engineering, Computer Engineering, Electrical Engineering +8