Development of a Transdermal Delivery Device for Melatonin In Vitro Study

Abstract

AbstractThe present study was undertaken to develop a transdermal delivery device for melatonin and to determine the effects of system design on the release of melatonin. Melatonin(MT) diffusion characteristics from 2 solvents through a series of ethylene vinyl acetate membranes with 4.5%, 9%, 19%, 28% vinyl acetate were characterized using vertical Franz® diffusion cells. The solvent used were 40% (v/v) propylene glycol (PG) and 40%(v/v) propylene glycol with 30%(w/v) 2-hydroxypropyl-β-cytrodextrin. The best release rate (Jss = 0.795 μg/h/cm2) was obtained from the 40% PG vehicle through the 28% vinyl acetate membrane. Melatonin diffusion through this membrane with an acrylate pressure sensitive adhesive (PSA) with and without MT loading was also studied. The data revealed an interaction between MT and the PSA in the systems with MT-loaded adhesive. A MT transdermal delivery device was constructed based on the above data. Effect of storage time (1 day, 2 days, and 3 days) on the developed device was also investigated. Steady state flux values of MT did not vary significantly with storage time (p-value = 0.14). The steady state flux was 1.88 ± 0.6 μg/hr/cm2(n = 9). However, storage time did affect the burst effect of MT. Total amount of MT released in the first hour was 137.4 ± 25.7 μg after 3 days, 61.5 ± 8.9 μg after 2 days, and 43.8 ± 20.9 μg after 1 day.