Structure and Infrastructure Engineering · 2009 · 77 citations · 16 references
EngineeringCivil EngineeringCorrosion ScienceFinite Element AnalysisStructural EngineeringCorrosion EngineeringCorrosion In ConcreteCorrosion-resistant MaterialsStructural Finite Element AnalysisStructural ReinforcementStructural Response AnalysisAnchorage BehaviorAnchorage LengthConcrete ReinforcementCorrosion ModelingExperimental Results InterpretationLoad-carrying CapacityReinforcement CorrosionSlip Bond Behavior
Corrosion of reinforcement affects the bond mechanism between reinforcement and concrete, and thus the anchorage. Reliable models describing this are needed especially for assessment of the load-carrying capacity of existing structures. This paper presents an analytical one-dimensional model for bond-slip response of corroded reinforcement. The proposed model is an extension of the bond-slip model given in the CEB-FIP Model Code 1990, and is practically applicable for structural analyses to determine the load-carrying capacity of corroded structures. Furthermore, the anchorage length needed to anchor the yield force is calculated from the bond slip, using the one-dimensional bond-slip differential equation. Results of the proposed model are compared with experimental results as well as results from an advanced three-dimensional finite element model. The suggested model is shown to give results that are consistent with the physical behaviour.
16
Corrosion influence on bond in reinforced concrete
Congqi Fang, Karin Lundgren, Liuguo Chen et al. · Cement and Concrete Research · 2004 · 510 citations