2004 · 16 citations · 5 references
EngineeringCommunicationElectrical EngineeringCommunication TheoryDigital CommunicationWireless CommunicationsChannel EstimationDigital Signal ProcessingInterference ManagementSpread Spectrum CommunicationWireless Channel ModelingBit Error RateBit-error Rate AnalysisDoppler SpreadDoppler Spread ModelingInter-symbol Interference
In OFDM transmission, a loss of sub-carrier orthogonality due to Doppler-spread of the channel leads to inter-carrier interference (ICI). We have proposed a method to reduce the ICI caused by the Doppler spread of the channel. The transmission channel is modeled by a combination of multiple Doppler-shifted propagation paths, and their parameters such as attenuation, relative delay and Doppler-shift are estimated using scattered pilot symbols. The ICI is canceled by multiplying the inverse matrix of the estimated channel matrix with the received OFDM symbol vector. However, the ICI canceller causes enhancement of noise component, so it can't improve the bit error rate characteristics sufficiently. In this paper, we propose the new ICI canceller based on MMSE, which does not cause enhancement of noise component. As the result of computer simulation, it was confirmed that the ICI canceller based on MMSE could reduce the bit error rate more than ICI canceller based on zero-forcing under the Doppler-spread channel.
5