Publication | Closed Access
Computational Fluid Dynamics Modeling of High Compute Density Data Centers to Assure System Inlet Air Specifications
147
Citations
0
References
2001
Year
Unknown Venue
EngineeringEnergy EfficiencyFluid MechanicsComputer ArchitectureHigh Performance ComputingDatacenter-scale ComputingRefrigerationNumerical SimulationGreen Data CenterSystems EngineeringModeling And SimulationPower ManagementElectrical EngineeringData Center SystemData CenterComputer EngineeringComputational Fluid DynamicsHigh Power DissipationHeat TransferPrototype Data CenterSmart GridAerospace EngineeringEnergy ManagementPower-efficient ComputingThermal EngineeringComputer Modeling
High power dissipation from microprocessors, support chips, memory chips and mass storage has resulted in large overall power dissipation from computer systems. The deployment of these computer systems in large numbers and in very dense configurations in a data center has resulted in very high power densities at room level. These computer systems are deployed in a rack. A standard 2-meter high rack can accommodate an equivalent of 40 thin desktop systems. If the maximum power dissipation from each system is 300W, a single rack in a data center can be assumed to dissipate 12 KW. A data center can have hundreds of these 12 KW racks. Due to such high heat loads, designing the air conditioning system in a data center using simple energy balance is no longer adequate. Moreover, the data center design cannot rely on intuitive design of air distribution. It is necessary to model the air flow and temperature distribution in a data center. In this paper, a computational fluid dynamics model of a prototype data center is presented to make the case for such modeling. The model is compared with experimental results from the prototype data center.