Makromolekulare Chemie Macromolecular Symposia · 1991 · 72 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationPolymer EngineeringPolymer MaterialsAerospace PolymersComposite MaterialsDuctilityDynamic Mechanical AnalysisFracture MechanicsFracture ToughnessDynamic Mechanical CharacterizationDynamic Mechanical PropertiesEpoxy ResinsFracture Toughness Of PolymersResin Material PropertiesThermoplastic CompositesToughened PolymersToughening Mechanisms
Highly crosslinked, brittle epoxy resin based on TGDDM cured with DDS is widely used as a matrix material for aerospace composites. This study aims to toughen that resin by incorporating a polyetherimide (PEI) thermoplastic rich phase without reducing its apparent stiffness. The authors incorporated PEI into the epoxy and used dynamic mechanical analysis, scanning electron microscopy, fracture toughness, and flexural modulus tests to characterize the resulting morphology and mechanical properties. Toughening depends on PEI concentration and test temperature, and the dominant mechanism is ductile drawing of the PEI‑rich phase across crack faces during fracture.
Abstract Highly crosslinked, brittle epoxy resin based on tètraglycidyl‐4,4′‐diaminodiphenyl methane (TGDDM) cured with 4,4′‐diaminodiphenyl sulphone (DDS) is widely used as a matrix material for aerospace composite applications. This work describes how inclusion of a polyetherimide (PEI) thermoplastic rich phase can significantly toughen the resin without a fall in apparent stiffness, which accompanies the more traditional method of rubber toughening. Dynamic mechanical analysis and scanning electron microscopy are used to characterize morphology, while fracture toughness and flexural modulus measurements are also performed on the cured resins. The extent of toughening is found to be dependent upon PEI concentration and test temperature. It is observed that the PEI rich phase toughens through ductile drawing across the faces of the advancing crack tip, and that this is the dominant toughening mechanism in the material.
6