IEEE Transactions on Communications · 2002 · 108 citations · 13 references
EngineeringCommunicationElectrical EngineeringComputer NetworksOptimizationWireless CommunicationsChannel CapacityCommunication NetworksNetwork Performance AnalysisWireless Channel ModelingAdaptive ModulationDelay ControlDynamic Programming PrinciplesFadingOptimal Threshold SelectionPacket SchedulingWireless Networking
We consider the downlink rate control problem in a wireless channel. A dynamic programming optimization method is introduced to obtain the optimal bit-rate/delay control policy in the downlink for packet transmission in wireless networks with fading channels. We assume that the base station is capable of transmitting data packets in the downlink with different bit rates, R/sub 0/<R/sub 1/</spl middot//spl middot//spl middot/<R/sub M-1/. It is assumed that the symbol rate is fixed in the system, and different bit rates are achieved by choosing the transmitted symbols from the appropriate signal constellation (adaptive modulation). The derived optimal rate control policy, in each time slot, selects the highest possible bit rate which minimizes the delay and at the same time minimizes the number of rate switchings in the network. The optimal bit-rate control problem is an important issue, especially in packet data networks, where we need to guarantee a quality of service (QoS) in the network. Our analytical as well as simulation results confirm that there is an optimal threshold policy to switch between different rates.
13
Capacity of a Burst-Noise Channel
E. N. Gilbert · Bell System Technical Journal · 1960 · 2.3K citations